Propeller and Reduction Drive Calculators

Work out the propeller RPM and the belt reduction ratio, check the blade tip speed and the centrifugal force on the hub.

Reduction Drive Ratio Calculator

Engine RPM, reduction ratio and propeller diameter give the propeller RPM and blade tip speed. The second part shows the ratio needed to keep the tip below a given speed.

2,500 RPMTip speed: 235.6 m/s • 69.2 % of the speed of sound
Ratio of at least 2.59 — keeps the tip speed at this engine RPM below 200 m/s

The tip speed limit comes from the propeller manufacturer. Flight speed and belt slip are not taken into account.

Propeller Tip Speed Calculator

Enter propeller diameter and RPM — get the linear speed at the blade tip in m/s and other units.

Blade Centrifugal Force Calculator

Enter RPM, blade weight, and distance from axis to center of gravity (CG) — get the centrifugal force value.

Formulas

Propeller RPM
n prop = n engine / i, where i is the reduction ratio.
Blade tip speed
v = π × D × n / 60, where D is the propeller diameter in metres and n is the propeller RPM. The speed of sound at 15 °C is about 340 m/s.
Ratio for a tip speed limit
i ≥ π × D × n engine / (60 × v limit).
Blade centrifugal force
F = m × ω² × r, where ω = 2π × n / 60, m is the blade mass and r is the distance from the axis to the blade centre of gravity.